Difference: IgiEmi (30 vs. 31)

Revision 312012-02-10 - CristinaAiftimiei

Line: 1 to 1
 
META TOPICPARENT name="IGIGuides"

IGI (based on EMI) Installation and Configuration

Line: 591 to 591
 
Changed:
<
<

WN Installation and Configuration - WORK IN PROGRESS

>
>

WN Installation and Configuration

  Have a look to the section Repository Settings and ensure that you have the common repo files.
Before starting the installation procedure remember to clean all yum cache and headers:
Line: 616 to 616
 

Service installation

Changed:
<
<
Install the WN metapackages, containing all packages needed. Have a look to the WN documentation before starting to install: WN Guides. IGI provides 5 custom profiles (metapackages) one for each specific batch system used in your cluster. Please use one of theese:
>
>
  • Have a look to the WN documentation before starting the installationl: WN Guide.
  • Install the WN metapackages, containing all packages needed:
yum install <metapackage>
  • IGI provides 5 custom profiles (metapackages) one for each specific batch system used in your cluster. Please use one of these (see table bellow)
    • IGI customizations:
      • unique metapackages & configurations for WNs with support for the batch systems Torque & LSF
      • contains the "LCG Applications Dependency Metapackage" - HEP_OSLib, compat-gcc-34-g77, compat-libgcc-296, compat-libstdc++-296, gcc-c++, ghostscript lapack, ncurses, openafs, openafs-client, openldap-clients
      • contains yaim-addons - new configuration package with IGI-custom configuration functions and files (replaces ig-yaim)
 
Profiles Metapackages INSTALLATION Nodetypes CONFIGURATION
WN igi-wn
igi-wn_lsf
igi-wn_lsf_noafs
igi-wn_torque
igi-wn_torque_noafs
WN
WN_LSF
WN_LSF_noafs
WN_torque
WN_torque_noafs
Changed:
<
<
Note: the igi-wn metapackage is useful for SGE or other Batch System

yum install <metapackage>
>
>
Note: the igi-wn metapackage is useful for SGE or other Batch System
 
IMPORTANT NOTE:
Changed:
<
<
All the metapackages name are case sensitive, you have to write it as described above.
>
>
Name are case sensitive, both for metapackages installation and notetype configuration, you have to use the ones in the table above.
 
Deleted:
<
<
IMPORTANT NOTE FOR TORQUE: After the Torque installation you should have the version 2.5.7-7. Please remember to copy the munge key from the batch master to the WN just installed
scp <batch master host>:/etc/munge/munge.key /etc/munge
 
Added:
>
>
IMPORTANT NOTE FOR TORQUE:
After the Torque installation you should have the version 2.5.7-7.
Please remember to copy the munge key from the batch master to the WN just installed
# scp <batch master host>:/etc/munge/munge.key /etc/munge 
 

Service Configuration

Line: 664 to 673
  You can find in this documentation: YAIM WN Variables all mandatory variables.
Changed:
<
<
If no errors are reported with the verification you can proceed to the configuration, otherwise correct them before continuing with the configuration.
>
>
If no errors are reported during verification you can proceed to the configuration, otherwise correct them before continuing.
 

YAIM Configuration

Changed:
<
<
Please use the debug flag ( "-d 6") to configure the services in order to have detailed information. For your convenience yo can save all the configuration information in a log file you can look at any time, separated from the yaimlog default one.
>
>
  • Please use the debug flag ( "-d 6") to configure the services in order to have detailed information.
  • For your convenience yo can save all the configuration information in a log file for each configuration separately, different from the default yaimlog, that contins all the history of all configurations.
 
Line: 676 to 686
 
All the nodetypes name are case sensitive, you have to write it as described above.
Changed:
<
<
For Torque:
>
>
  • For Torque:
 
 /opt/glite/yaim/bin/yaim -c -d 6 -s  <site-info.def>  -n  WN_torque 2>&1 | tee /root/conf_WN_torque.`hostname -s`.`date +%Y-%m-%d-%H-%M-%S`.log
or
 /opt/glite/yaim/bin/yaim -c -d 6 -s  <site-info.def>  -n  WN_torque_noafs 2>&1 | tee /root/conf_WN_torque_noafs.`hostname -s`.`date +%Y-%m-%d-%H-%M-%S`.log
Changed:
<
<
For LSF:
>
>
  • For LSF:
 
 /opt/glite/yaim/bin/yaim -c -d 6 -s  <site-info.def>  -n  WN_LSF 2>&1 | tee /root/conf_WN_LSF`.hostname -s`.`date +%Y-%m-%d-%H-%M-%S`.log
or
 /opt/glite/yaim/bin/yaim -c -d 6 -s  <site-info.def>  -n  WN_LSF_noafs 2>&1 | tee /root/conf_WN_LSF_noafs.`hostname -s`.`date +%Y-%m-%d-%H-%M-%S`.log
Changed:
<
<
For Other Batch System:
>
>
  • For Other Batch System:
 
 /opt/glite/yaim/bin/yaim -c -d 6 -s  <site-info.def>  -n  WN 2>&1 | tee /root/conf_WN.`hostname -s`.`date +%Y-%m-%d-%H-%M-%S`.log

Service Testing - Reference Card

Changed:
<
<
After service installation to have a look if all were installed in a proper way, you could have a look to Service WN Reference Card. In this page you can found what daemons are running after installation and any other useful WN issue information.
>
>
After service installation to have a look if all were installed in a proper way, you could have a look to Service WN Reference Card. In this page you can found what daemons are running after installation and any other useful WN issue information.
 

WN Documentation References:

Changed:
<
<
>
>
 
  • Other Documentation available here
Added:
>
>

UI Installation and Configuration

 
Changed:
<
<

UI Installation and Configuration - WORK IN PROGRESS

Have a look to the section Repository Settings and ensure that you have the common repo files.
Before starting the installation procedure remember to clean all yum cache and headers:

>
>
  • Have a look to the section Repository Settings and ensure that you have the common repo files
  • Before starting the installation procedure remember to clean all yum cache and headers:
 
yum clean all
Line: 718 to 725
 

Service installation

Changed:
<
<
Install the UI metapackages, containing all packages needed. Have a look to the UI documentation before starting to install: UI Guides.
>
>
  • Have a look to the UI documentation before starting to install: UI Guides.
  • Install the UI metapackages, containing all packages needed.
 
yum install emi-ui

Line: 729 to 736
 

YAIM Verification

Changed:
<
<
  • Before starting the configuration PLEASE TEST that you have defined all the mandatory variables for all the UI profile
>
>
  • Before starting the configuration PLEASE TEST that you have defined all the mandatory variables for the UI profile
 
 /opt/glite/yaim/bin/yaim -v -s <site-info.def> -n  UI 

You can find in this documentation: YAIM UI Variables all mandatory variables.

Changed:
<
<
If no errors are reported with the verification you can proceed to the configuration, otherwise correct them before continuing with the configuration.
>
>
If no errors are reported during the verification you can proceed to the configuration, otherwise correct them before continuing.
 

YAIM Configuration

Changed:
<
<
Please use the debug flag ( "-d 6") to configure the services in order to have detailed information. For your convenience yo can save all the configuration information in a log file you can look at any time, separated from the yaimlog default one.
>
>
  • Please use the debug flag ( "-d 6") to configure the services in order to have detailed information.
  • For your convenience yo can save all the configuration information in a log file for each configuration separately, different from the default yaimlog, that contins all the history of all configurations.
 
 /opt/glite/yaim/bin/yaim -c -d 6 -s  <site-info.def>  -n  UI 2>&1 | tee /root/conf_UI.`hostname -s`.`date +%Y-%m-%d-%H-%M-%S`.log

Service Testing - Reference Card

Changed:
<
<
After service installation to have a look if all were installed in a proper way, you could have a look to UI Reference Card or User Troubleshooting Guide. In this page you can found some typical problems occured and any other useful service information.
>
>
After service installation to have a look if all were installed in a proper way, you could have a look to UI Reference Card or User Troubleshooting Guide. In this page you can find some commonl errors and other useful service information.
 

UI Documentation References:

Changed:
<
<
>
>
 
META FILEATTACHMENT attachment="Upgrade_Instructions_to_StoRM_v18.pdf" attr="" comment="Upgrade StoRM istructions. Useful to the data stored partition" date="1321956018" name="Upgrade_Instructions_to_StoRM_v18.pdf" path="Upgrade_Instructions_to_StoRM_v18.pdf" size="55433" user="SergioTraldi" version="1"
 
This site is powered by the TWiki collaboration platformCopyright © 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback