walltime workaround

If on the queues there is published:

GlueCEStateWaitingJobs: 444444

and in the log /var/log/bdii/bdii-update.log you notice errors like the folllowing:

Traceback (most recent call last):
  File "/usr/libexec/lcg-info-dynamic-scheduler", line 435, in ?
    wrt = qwt * nwait
TypeError: unsupported operand type(s) for *: 'NoneType' and 'int'

probably the queues have no "resources_default.walltime" parameter configured.

So define it for each queue by launching, for example:

# qmgr -c "set queue prod resources_default.walltime = 01:00:00"
# qmgr -c "set queue cert resources_default.walltime = 01:00:00"
# qmgr -c "set queue cloudtf resources_default.walltime = 01:00:00"

Software Area settings

If the Software Area is hosted on your CE, you have to create it and export to the WNs in the site.def we set:

VO_SW_DIR=/opt/exp_soft

• directory creation

mkdir /opt/exp_soft/

• edit /etc/exports creating a line like the following:

/opt/exp_soft/ *.cnaf.infn.it(rw,sync,no_root_squash)

• check nfs and portmap status

# service nfs status
rpc.mountd is stopped
nfsd is stopped

# service portmap status
portmap is stopped

# service portmap start
Starting portmap:                                          [  OK  ]

# service nfs start
Starting NFS services:                                     [  OK  ]
Starting NFS daemon:                                       [  OK  ]
Starting NFS mountd:                                       [  OK  ]
Starting RPC idmapd:                                       [  OK  ]

# chkconfig nfs on
# chkconfig portmap on

• after any modification in /etc/exports you can launch

# exportfs -ra

or simply restart nfs daemon

• After service installation to have a look if all were installed in a proper way, you could have a look to Service CREAM Reference Card
• You can also perform some checks after the installation and configuration of your CREAM

#
# YAIM creamCE specific variables
#

# LSF settings: path where lsf.conf is located
#BATCH_CONF_DIR=lsf_install_path/conf
#
# CE-monitor host (by default CE-monitor is installed on the same machine as 
# cream-CE)
CEMON_HOST=$CE_HOST
#
# CREAM database user
CREAM_DB_USER=*********
#
CREAM_DB_PASSWORD=*********
# Machine hosting the BLAH blparser.
# In this machine batch system logs must be accessible.
#BLPARSER_HOST=set_to_fully_qualified_host_name_of_machine_hosting_blparser_server
BLPARSER_HOST=$CE_HOST

#
# YAIM DGAS Sensors specific variables
#


################################
# DGAS configuration variables #
################################
# For any details about DGAS variables please refer to the guide:
# http://igrelease.forge.cnaf.infn.it/doku.php?id=doc:guides:dgas

# Reference Resource HLR for the site.
DGAS_HLR_RESOURCE="prod-hlr-01.pd.infn.it"

# Specify the type of job which the CE has to process.
# Set ”all” on “the main CE” of the site, ”grid” on the others.
# Default value: all
#DGAS_JOBS_TO_PROCESS="all"

# This parameter can be used to specify the list of VOs to publish.
# If the parameter is specified, the sensors (pushd) will forward
# to the Site HLR just records belonging to one of the specified VOs.
# Leave commented if you want to send records for ALL VOs
# Default value: parameter not specified
#DGAS_VO_TO_PROCESS="vo1;vo2;vo3..."


# Bound date on jobs backward processing.
# The backward processing does not consider jobs prior to that date.
# Default value: 2009-01-01.
#DGAS_IGNORE_JOBS_LOGGED_BEFORE="2011-11-01"

# Main CE of the site.
# ATTENTION: set this variable only in the case of site with a “singleLRMS”
# in which there are more than one CEs or local submission hosts (i.e. host
# from which you may submit jobs directly to the batch system).
# In this case, DGAS_USE_CE_HOSTNAME parameter must be set to the same value
# for all hosts sharing the lrms and this value can be arbitrary chosen among
# these submitting hostnames (you may choose the best one).
# Otherwise leave it commented.
#DGAS_USE_CE_HOSTNAME=""

# Path for the batch-system log files.
# * for torque/pbs:
# DGAS_ACCT_DIR=/var/torque/server_priv/accounting
# * for LSF:
# DGAS_ACCT_DIR=lsf_install_path/work/cluster_name/logdir
# * for SGE:
# DGAS_ACCT_DIR=/opt/sge/default/common/
DGAS_ACCT_DIR=/var/torque/server_priv/accounting

# Full path to the 'condor_history' command, used to gather DGAS usage records
# when Condor is used as a batch system. Otherwise leave it commented.
#DGAS_CONDOR_HISTORY_COMMAND=""

# ll /etc/grid-security/host*
-rw-r--r-- 1 root root 1440 Oct 18 09:31 /etc/grid-security/hostcert.pem
-r-------- 1 root root  887 Oct 18 09:31 /etc/grid-security/hostkey.pem

IMPORTANT: The updated EPEL5 build of torque-2.5.7-1 as compared to previous versions enables munge as an inter node authentication method.

• verify that munge is correctly installed:

# rpm -qa | grep munge
munge-libs-0.5.8-8.el5
munge-0.5.8-8.el5

• On one host (for example the batch server) generate a key by launching:

# /usr/sbin/create-munge-key

# ls -ltr /etc/munge/
total 4
-r-------- 1 munge munge 1024 Jan 13 14:32 munge.key

• Copy the key, /etc/munge/munge.key to every host of your cluster, adjusting the permissions:

# chown munge:munge /etc/munge/munge.key

• Start the munge daemon on each node:

# service munge start
Starting MUNGE:                                            [  OK  ]

# chkconfig munge on

SUGGESTION: use the same site-info.def for CREAM and WNs

O.S. and Repos

• Starts from a fresh installation of Scientific Linux 5.x (x86_64).

# cat /etc/redhat-release 
Scientific Linux SL release 5.7 (Boron) 

* Install the additional repositories: EPEL, Certification Authority, UMD

# yum install yum-priorities yum-protectbase
# cd /etc/yum.repos.d/
# rpm -ivh http://mirror.switch.ch/ftp/mirror/epel//5/x86_64/epel-release-5-4.noarch.rpm
# wget http://repo-pd.italiangrid.it/mrepo/repos/egi-trustanchors.repo
# rpm -ivh http://repo-pd.italiangrid.it/mrepo/EMI/1/sl5/x86_64/updates/emi-release-1.0.1-1.sl5.noarch.rpm
# wget http://repo-pd.italiangrid.it/mrepo/repos/igi/sl5/x86_64/igi-emi.repo

• Be sure that SELINUX is disabled (or permissive). Details on how to disable SELINUX are here:

# getenforce 
Disabled

• Check the repos list (sl-*.repo are the repos of the O.S. and they should be present by default).

# ls /etc/yum.repos.d/
egi-trustanchors.repo  
emi1-third-party.repo emi1-base.repo emi1-updates.repo
igi-emi.repo
epel.repo epel-testing.repo  
sl-contrib.repo sl-fastbugs.repo sl-security.repo sl-testing.repo sl-debuginfo.repo sl.repo sl-srpms.repo

# yum clean all
Loaded plugins: downloadonly, kernel-module, priorities, protect-packages, protectbase, security, verify, versionlock
Cleaning up Everything

# yum install ca-policy-egi-core
# yum install xml-commons-apis
# yum install emi-cream-ce
# yum install emi-torque-server emi-torque-utils
# yum install glite-dgas-common glite-dgas-hlr-clients glite-dgas-hlr-sensors glite-dgas-hlr-sensors-producers yaim-dgas

see here for details