BLAH Testplan

Unit tests

Not available

Deployment tests

Since BLAH is deployed as part of the CREAM-CE, the installation and configuration of a CREAM CE should be considered. This is documented in the CREAM system administrator guide.

System tests

Basic functionality tests

Test submission

On each supported batch system (now LSF, PBS and GE) the following tests should be performed:

  • Test plain submission
  • Test submission with file transfers

The first two tests are implemented with the attached scripts.

To run it:

  • Log on on the CREAM CE as user tomcat
  • Create the directory /tmp/blex and cd on this directory
  • Copy a proxy of yours and install it in this directory. Call it /tmp/blex/proxy. It should have tomcat.tomcat as ownership
  • wget and untar the blex.tar.gz
  • Edit and customize the file blex_local_conf.sh:
    • blex_x509userproxy should be "/tmp/blex/proxy"
    • blex_blah_path= should be "/usr/bin/blahpd"
    • blex_iwd should be "/tmp/blex"
    • blex_file_storage should be "/tmp"
    • blex_desired_batchsystem should be set to "lsf" or "pbs" or "sge" according to the batch system where to perform the test
    • blex_desired_queue should be set to the queue where to submit the jobs
    • blex_setup_glexec should be set to 0
    • blex_setup_sudo should be set to 1
    • blex_setup_sudo_user should be set to a valid existing local account
    • blex_proxy_in_submit_cmd should be set to 1
    • blex_n_DEFAULT_jobs should be set to 0
    • blex_n_HOLDRELEASE_jobs should be set to 0
    • blex_n_RENEWAL_jobs should be set to 0
    • blex_n_TRANSFERFILES_jobs should be set to the number of jobs to be submitted. 1000 can be a valid value
  • Run the script blah_exerciser.sh
  • Check its output in the stdout. It should report that all jobs succeeded and 0 failed.

BLParser test

The following test of the blparser (configured in old and new way) should be performed:

  • Test that notifications are sent for a job which finishes normally
  • Test that notifications are sent for a job which is cancelled
  • Test that notifications are sent for a job which is suspended and then resumed


Test that notifications are sent for a job which finishes normally with old blparser

First of all configure a CREAM-CE using the old blparser configured in the old way as described at: http://wiki.italiangrid.it/twiki/bin/view/CREAM/SystemAdministratorGuideForEMI1#1_2_4_Choose_the_BLAH_BLparser_d

Submit this JDL to a CREAM-CE using the glite-ce-job-submit command:

glite-ce-job-submit -a -r <CEId> test1.jdl


test1.jd:


[
executable="/bin/sleep";
arguments="100";
]

After the job completed its execution (it must be needed to then wait for a couple of minutes), check the log file /var/log/cream/glite-xxxparser.log. For the relevant job there should be:

  • A notification with JobStatus=1 (this can be missing)
  • A notification with JobStatus=2 (this can be missing)
  • A notification with JobStatus=4 (this must be there)


Test that notifications are sent for a job which is cancelled with old blparser

First of all configure a CREAM-CE using the old blparser configured in the old way as described at: http://wiki.italiangrid.it/twiki/bin/view/CREAM/SystemAdministratorGuideForEMI1#1_2_4_Choose_the_BLAH_BLparser_d

Submit this JDL to a CREAM-CE using the glite-ce-job-submit command:

glite-ce-job-submit -a -r <CEId> test1.jdl


test1.jd:


[
executable="/bin/sleep";
arguments="100";
]

Then cancels the job with glite-ce-job-cancel.

After the job is actually cancelled (it must be needed to then wait for a couple of minutes), check the log file /var/log/cream/glite-xxxparser.log. For the relevant job there should be:

  • A notification with JobStatus=1 (this can be missing)
  • A notification with JobStatus=2 (this can be missing)
  • A notification with JobStatus=3 (this must be there)


Test that notifications are sent for a job which is suspended and then resumed with old blparser

First of all configure a CREAM-CE using the old blparser configured in the old way as described at: http://wiki.italiangrid.it/twiki/bin/view/CREAM/SystemAdministratorGuideForEMI1#1_2_4_Choose_the_BLAH_BLparser_d

Submit this JDL to a CREAM-CE using the glite-ce-job-submit command:

glite-ce-job-submit -a -r <CEId> test1.jdl


test1.jd:


[
executable="/bin/sleep";
arguments="200";
]

Then suspends the job with glite-ce-job-suspend.

Check the batch system and verify than the job is actually suspended. Then wait for 5 minutes and then resume the job using the glite-ce-job-resume command.

After the job finishes (it must be needed to then wait for a couple of minutes), check the log file /var/log/cream/glite-xxxparser.log. For the relevant job there should be:

  • A notification with JobStatus=1 (this can be missing)
  • A notification with JobStatus=2 (this can be missing)
  • A notification with JobStatus=5 (this must be there)
  • A notification with JobStatus=2 (this can be missing)
  • A notification with JobStatus=4 (this must be there)

Note that with PBS and SGE it is possible to suspend only IDLE (i.e. not yet running) jobs.


Test that notifications are sent for a job which finishes normally with new blparser

First of all configure a CREAM-CE using the new blparser configured in the old way as described at: http://wiki.italiangrid.it/twiki/bin/view/CREAM/SystemAdministratorGuideForEMI1#1_2_4_Choose_the_BLAH_BLparser_d

Submit this JDL to a CREAM-CE using the glite-ce-job-submit command:

glite-ce-job-submit -a -r <CEId> test1.jdl


test1.jd:


[
executable="/bin/sleep";
arguments="100";
]

After the job completed its execution (it must be needed to then wait for a couple of minutes), check the log file /var/log/cream/glite-ce-bnotifier.log. For the relevant job there should be:

  • A notification with JobStatus=1 (this can be missing)
  • A notification with JobStatus=2 (this can be missing)
  • A notification with JobStatus=4 (this must be there)


Test that notifications are sent for a job which is cancelled with new blparser

First of all configure a CREAM-CE using the old blparser configured in the new way as described at: http://wiki.italiangrid.it/twiki/bin/view/CREAM/SystemAdministratorGuideForEMI1#1_2_4_Choose_the_BLAH_BLparser_d

Submit this JDL to a CREAM-CE using the glite-ce-job-submit command:

glite-ce-job-submit -a -r <CEId> test1.jdl


test1.jd:


[
executable="/bin/sleep";
arguments="100";
]

Then cancels the job with glite-ce-job-cancel.

After the job is actually cancelled (it must be needed to then wait for a couple of minutes), check the log file /var/log/cream/glite-ce-bnotifier.log. For the relevant job there should be:

  • A notification with JobStatus=1 (this can be missing)
  • A notification with JobStatus=2 (this can be missing)
  • A notification with JobStatus=3 (this must be there)


Test that notifications are sent for a job which is suspended and then resumed with new blparser

First of all configure a CREAM-CE using the old blparser configured in the new way as described at: http://wiki.italiangrid.it/twiki/bin/view/CREAM/SystemAdministratorGuideForEMI1#1_2_4_Choose_the_BLAH_BLparser_d

Submit this JDL to a CREAM-CE using the glite-ce-job-submit command:

glite-ce-job-submit -a -r <CEId> test1.jdl


test1.jd:


[
executable="/bin/sleep";
arguments="200";
]

Then suspends the job with glite-ce-job-suspend.

Check the batch system and verify than the job is actually suspended. Then wait for 5 minutes and then resume the job using the glite-ce-job-resume command.

After the job finishes (it must be needed to then wait for a couple of minutes), check the log file /var/log/cream/glite-ce-bnotifier.log. For the relevant job there should be:

  • A notification with JobStatus=1 (this can be missing)
  • A notification with JobStatus=2 (this can be missing)
  • A notification with JobStatus=5 (this must be there)
  • A notification with JobStatus=2 (this can be missing)
  • A notification with JobStatus=4 (this must be there)

Note that with PBS and SGE it is possible to suspend only IDLE (i.e. not yet running) jobs.

Regression tests

See: http://wiki.italiangrid.it/twiki/bin/view/CREAM/RegressionTestWorkPlan

Standard compliance and conformance tests

Not available

Inter-component tests

Not available

-- MassimoSgaravatto - 2011-12-20

Topic attachments
I Attachment Action Size Date Who Comment
Unknown file formatgz blex.tar.gz manage 16.8 K 2011-12-20 - 16:18 MassimoSgaravatto  
Topic revision: r1 - 2011-12-20 - MassimoSgaravatto
 

This site is powered by the TWiki collaboration platformCopyright © 2008-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback