Tags: , view all tags

PATCH 3179

Automatic tests:

Checked bugs:

Bug #17949: BLAH should operate with no access whatsoever to the batch system logs

Bug #37430: BLParser should properly filter it's log output

Bug #45364: BLAH_JOB_CANCEL should report failure reason FIXED
- submit and cancel a job using the LRMS command (e.g. qdel) and verify that the reason reports "Cancelled by CE admin"

Bug #46419: CREAM sandbox area should be scratched when the CREAM DB is scratched FIXED
- Submit at least one job to the CE and wait for its termination, so that the sandbox area is not empty
- Increment the value of the parameters creamdb_database_version and/or delegationdb_database_version in the file /opt/glite/etc/glite-ce-cream/cream-config.xml.template
- reconfigure the node with yaim and check whether the sandbox area is empty

Bug #47070: [ yaim-cream ] yaim cream module should support remote mysql setup

Bug #47254: Possible problems if the proxy used to talk with CREAM is shorter than 10 minutes FIXED
- create a voms-proxy whose lifetime is shorter than 10 minutes
- submit a simple job whose lifetime is shorter than the voms-proxy one and verify its correct termination

Bug #47804: Possible problems configuring blah in CREAM-CE for LSF

Bug #48786: Load should be one of the parameter of DISABLE_SUBMISSION_POLICY in CREAM FIXED
- specify a low load level in the file /opt/glite/bin/glite_cream_load_monitor
- try to overload the node with the testsuite: cream-test-monitored-submit -r 30 -n 20000 -m 2000 -C 50 -l log4py.conf -j test.jdl -R --sotimeout 60 --vo dteam --valid 02:00 and verify that with high load the submissions are rejected

Bug #49497: user proxies on CREAM do not get cleaned up FIXED
- delegate a proxy whose lifetime is shorter than the parameter delegation_purge_rate of the CREAM configuration file
- wait for the new proxy cleanup run (at least twice the delegation_purge_rate) and verify that the proxy file has been removed from the directory

Bug #50226: yaim-cream-ce should use config_secure_tomcat FIXED
- install the CE node from scratch
- verify the state of the trustmanager accessing the URL: https://ce-host:8443/ce-cream/services

Bug #50723: CREAM: check for the jobtype is not case insensitive FIXED
- submit a job specifying the parameter "jobtype=Normal" in the JDL and verify the correct execution of the job

Bug #50875: CREAM: reason for cancelled jobs should be reported FIXED
- submit and cancel a job using the CREAM CLI command and verify that the reason reports "Cancelled by user"
- submit and cancel a job using the LRMS command (e.g. qdel) and verify that the reason reports "Cancelled by CE admin"

Bug #50876: CREAM reports that the proxy expired even when the problem is in detecting the lifetime of the proxy

Bug #51046: CREAM: DelegProxyInfo info sometimes is wrong FIXED
- submit a job, wait for its termination and verify the correct lifetime of the proxy

Bug #51118: config_cream_glexec doesn't set glexec permissions right FIXED
- install a CE node from scratch and verify the permissions for /opt/glite/sbin/glexec (6555) and /opt/glite/etc/glexec.conf (640)

Bug #51124: catalina.out is clogged with grid-proxy-init warnings FIXED
- submit a job and check the catalina.out file

Bug #51128: lcas-suexec.db on CREAM CE should be named lcas-glexec.db for consistency FIXED
- install a CE node from scratch
- verify the existence of the files: /opt/glite/etc/lcas/lcas-glexec.db and /opt/glite/etc/lcmaps/lcmaps-glexec.db

Bug #51249: [ yaim-cream-ce ] refactor config_cream_db

Bug #51310: Wrong event timestamp FIXED
- run the consumer server (glite-ce-monitor-consumer) on the client machine
- create a subscription for the topic CREAM_JOBS on the CE specifying the URL of the consumer server above
- submit a job and verify the validity of the field TIMESTAMP of any event

Bug #51311: Wrong event timestamp generated by the CREAM Job Sensor FIXED
- act as for bug #51310

Bug #51313: CEMon must not notify the expired events CANNOT REPRODUCE

Bug #51705: glexec-wrapper.sh should be removed from CREAM RPM FIXED
- check the content of glite-ce-cream rpm

Bug #51706: yaim-cream-ce: remove "lcg" prefix from JOB_MANAGER FIXED
- change the value of JOB_MANAGER in the siteinfo.def
- configure the node with YAIM and verify that the resource BDII publishes this new value in the GlueCeUniqueids

Bug #51892: Exception when using java.text.DateFormat.parse

Bug #51928: BLAH crashes if the cerequirements classad attribute is malformed FIXED
- submit a job specifying a malformed cerequirements parameter
- verify that the job is executed and the parameter is ignored

Bug #51978: CREAM can be slow to start TESTING NOW
- submit a big bunch of long-lived jobs, for example using cream-test-monitored-submit -r 30 -n 2000 -m 2000 -C 100 -j long.jdl -R <ce_id> and long.jdl is "[executable="/bin/sleep";arguments="3600";]"
- when all the jobs have been submitted restart the service and verify the startup time.

Bug #51993: Proxy renewal not very efficient for multiple jobs having the same delegationid

Bug #52020: [ yaim-cream-ce ] Support use of file (besides syslog) for glexec logging

Bug #52050: misleading error message "The problem seems to be related to glexec INVALID
- The CREAM service does not make use of glexec anymore

Bug #52051: CEMon must remove all expired subscriptions on start-up FIXED
- create a subscription for the topic CREAM_JOBS on the CE with a short lifetime
- shutdown the service and wait for the expiration of the subscription
- restart the service and verify that the subscription does not exist anymore in the directory /opt/glite/var/cemonitor/subscription

Bug #52052: Sometimes the getInfo() operation does not report the right list of topics FIXED
- enable or disable the CE sensor removing or adding the corresponding tag in the file /opt/glite/etc/glite-ce-monitor/cemonitor-config.xml
- wait for cemonitor to reload the configuration (usually 10m)
- verify the availability of the topic using the command glite-ce-monitor-gettopics

Bug #52268: BLAH leaves files in /tmp when CErequirements is set FIXED
- submit a job specifying a simple CE requirements (e.g. cerequirements="other.GlueHostMainMemoryRAMSize > 2000")
- verify that, after the execution of the job, in the tmp directory no files ce-req-file-* are left

Bug #52577: [ yaim-cream-ce ] create CREAM_GLEXEC_USER_HOME variable

Bug #52651: CREAM file descriptor overuse FIXED
- try to overload the node with the testsuite: cream-test-monitored-submit -r 30 -n 20000 -m 2000 -C 50 -l log4py.conf -j test.jdl -R --sotimeout 60 --vo dteam --valid 02:00 and verify that with high load the submissions are rejected
- seek "too many open files" in the CREAM log

Bug #52719: Blah doesn't set the 'executable' flag if a local jobwrapper is found

Bug #52942: Missing description for ISB/OSB error in jobwrapper FIXED
- submit a job with an unreachable host in the inputsandbox or in the outputsandboxbasedesturi parameter
- verify that the output of the glite-ce-job-status contains the full description of the failure

Bug #53124: blparser_master could crash if some variable in blparser.conf are not set

Bug #53459: [CREAM] Provide method to improve the detection of job status changes by ICE

Bug #53499: CREAM job wrapper template should be put outside the jar FIXED
- check wheter the file /opt/glite/share/webapps/ce-cream.war contains the file WEB-INF/jobwrapper.tpl

Bug #54812: lsf_submit.sh job requirement

Bug #54900: [ glite-yaim-cream-ce ] config_cream_tomcat_user should not add tomcat to VO FIXED
- check the membership of any VO group

Bug #54949: Some job can remain in running state when BLParser is restarted for both lsf and pbs

Bug #55078: Possible final state not considered in BLParserPBS and BUpdaterPBS

Bug #55420: Allow admin to purge CREAM jobs in a non terminal status FIXED
- temporary disconnect any WN from the CE, e.g. shutting down the mom server in a TORQUE installation
- submit a job
- on the CE with administrator privileges run the command: /opt/glite/sbin/JobDBAdminPurger.sh -u -p -s 2 as described in the wiki page
- verify with glite-ce-job-list that the job has been purged from the database
- verify that the sandbox directory of that job has been removed from /opt/glite/var/cream_sandbox
- remove manually the job from the batch system and reconnect all the WN

Bug #55438: BUpdater problems in updating job state with AssignFinalState for all batch systems

Bug #55531: BUpdaterPBS should consider lines like "unable to run job"

Bug #55565: BLAH configuration attribute blah_disable_wn_proxy_renewal fails to disable proxy renewal.

Bug #56075: Job failure reasons missing in the CREAM log file FIXED
- submit a job with an unreachable host in the inputsandbox or in the outputsandboxbasedesturi parameter
- verify that in the log file appears the message: failureReason=Cannot move ISB (): error: globus_xio: Unable to connect to xxxx:2811 globus_xio: globus_libc_getaddrinfo failed.globus_common: Name or service not known

Bug #56339: [blah] "service glite-ce-blparser restart" does not always work FIXED
- try the command /opt/glite/etc/init.d/glite-ce-blparser restart and verify the correct behaviour of the script

Bug #56367: CREAM RPM depends on C libs FIXED
- check if the package of glite-ce-cream contains any elf executable

Bug #56518: BLAH blparser doesn't start after boot of the machine FIXED
- install the CE node from scratch specifying the parameter BLPARSER_WITH_UPDATER_NOTIFIER=false in the yaim configuration for creamCE
- reboot the machine and verify that the blparser_master is running

Bug #56697: CREAM logging must be improved when CREAM register operation fails FIXED
- force the service to fail a register operation, e.g. temporary renaming the sandbox directory
- verify that the log reports at least the JobID and the reason of the failure

Bug #57210: BLAH condor_submit script doesn't recognize certain options.

Bug #57307: condor_submit.sh does not support the handling of "local" attributes

Bug #57820: [yaim-cream-ce] CREAM-CE publishes GlueServiceDataValue incomplete

Bug #58103: Cream database Query performance FIXED
- Internal improvement
- run a set of stress-tests and verify the performance

Bug #58109: Wrong value for the "service version" property FIXED
- verify the property using the command glite-ce-service-info

Bug #58119: CREAM CE: publish Production instead of Special as default value for GlueCEStateStatus

Bug #59423: RFE: support for ISB/OSB transfers from/to gridftp servers running using credentials

Bug #58659: NullPointerException from getStatus

Bug #58792: JobRegister fails, because cream_sandbox directory doesn't exist FIXED
- temporary rename the directory /opt/glite/var/cream_sandbox without turning off the service
- submit a job and verify that the failure reports "cannot create the job's working directory!"

Bug #58941: [yaim-cream-ce] lcmaps confs for glexec and gridftp are not fully synchronized

Bug #59005: Possible problem with hold/resumed jobs in BUpdaterLSF

Bug #59329: Proxy symlinks left in the registry area until purged FIXED
- submit a job and verify the verify the existence of the related symlink in the directory /opt/glite/var/blah/user_blah_job_registry.bjr/registry.proxydir
- when the job terminates verify that the symlink has been removed by blah.

Bug #59686: Possible crash of BUpdarePBS due to wrong malloc FIXED
- Define the parameter pbs_spoolpath in the file /opt/glite/etc/blah.config
- run the BUpdaterPBS daemon and verify its liveness

Bug #59962: Sometimes the CREAM initialization fails with "UserId = ADMINISTRATOR is not enable for that operation"CANNOT REPRODUCE

Bug #60831: Error log message: "CREAM_JOB_SENSOR_HOST parameter not specified" FIXED
- verify that the parameter "CREAM_JOB_SENSOR_HOST" is not defined in the file /opt/glite/etc/glite-ce-cream/cream-config.xml
- submit several jobs
- verify that the log of the CREAM service does not report the error above

Bug #61322: CREAM jw doesn't set GLITE_WMS_RB_BROKERINFO FIXED
- submit a job and verify that the jobwrapper script, contained into the sandbox area for that job, defines correctly the __brokerinfo variable

Bug #61407: Set CE_ID in the cream jw FIXED
- submit a job and verify that the jobwrapper script, contained into the sandbox area for that job, defines correctly the CE_ID variable

Bug #61493: [ yaim-cream-ce ] glexec_get_account policy order is wrong

Bug #61604: yaim-cream-ce should not install config_gip_software_plugin FIXED
- verify that the glite-yaim-cream-ce package does not contain the file config_gip_software_plugin but it contains config_cream_gip_software_plugin instead

Bug #61730: CREAM jw: GLITE_WMS_LOG_DESTINATION should always be set with the FQDN FIXED
- submit a job and verify that the jobwrapper script, contained into the sandbox area for that job, defines a FQDN in the __ce_hostname variable