Notes about Installation and Configuration of a Top BDII
- These notes are provided by site admins on a best effort base as a contribution to the IGI communities and MUST not be considered as a subsitute of the Official IGI documentation.
- This document is addressed to site administrators responsible for middleware installation and configuration.
- The goal of this page is to provide some hints and examples on how to install and configure an IGI Top BDII based on EMI/UMD middleware.
NB: The TOP-BDII service is a
CORE service, it should not be installed at Resource Center level. The official endpoint provided by IGI is
egee-bdii.cnaf.infn.it
and
MUST be used by all Resource Centers and Services part of the IGI infrastructure. If you want to provide an official instances which will be added to the IGI endpoint, please contact
igi-noc@lists.italiangrid.it
References
- About IGI - Italian Grid infrastructure
- About IGI Release
- IGI Official Installation and Configuration guide
- Troubleshooting Guide for Operational Errors on EGI Sites
- Grid Administration FAQs page
Reccommendations
- The service needs at least two cores, 4 GB RAM, 10 GB disk space. A full virtualized machine based on KVM has been used in the following notes.
O.S. and Repos
- Starts from a fresh installation of Scientific Linux 5.x (x86_64).
# cat /etc/redhat-release
Scientific Linux SL release 5.7 (Boron)
- Install the additional repositories: EPEL, Certification Authority, EMI
# cd /etc/yum.repos.d/
# rpm -ivh http://mirror.switch.ch/ftp/mirror/epel//5/x86_64/epel-release-5-4.noarch.rpm
# wget http://repo-pd.italiangrid.it/mrepo/repos/egi-trustanchors.repo
# rpm -ivh http://repo-pd.italiangrid.it/mrepo/EMI/1/sl5/x86_64/updates/emi-release-1.0.1-1.sl5.noarch.rpm
# yum install yum-priorities yum-protectbase
- Be sure that SELINUX is disabled (or permissive). Details on how to disable SELINUX are here:
# getenforce
Disabled
- Check the repos list (sl-*.repo are the repos of the O.S. and they should be present by default).
# ls /etc/yum.repos.d/
emi1-base.repo emi1-updates.repo epel-testing.repo emi1-third-party.repo
sl-contrib.repo sl-fastbugs.repo sl-security.repo sl-testing.repo sl-debuginfo.repo sl.repo sl-srpms.repo
egi-trustanchors.repo
epel.repo
Update host and perform the installation of package(s)
# yum clean all
Loaded plugins: downloadonly, kernel-module, priorities, protect-packages, protectbase, security, verify, versionlock
Cleaning up Everything
# yum install ca-policy-egi-core emi-bdii-top
Loaded plugins: downloadonly, kernel-module, priorities, protect-packages, protectbase, security, verify, versionlock
EGI-trustanchors | 951 B 00:00
EGI-trustanchors/primary | 29 kB 00:00
EGI-trustanchors 203/203
EMI-1-base | 1.9 kB 00:00
EMI-1-base/primary_db | 236 kB 00:00
EMI-1-third-party | 1.9 kB 00:00
EMI-1-third-party/primary_db | 25 kB 00:00
EMI-1-updates | 1.9 kB 00:00
EMI-1-updates/primary_db | 168 kB 00:00
epel | 3.7 kB 00:00
epel/primary_db | 3.9 MB 00:00
sl-base | 1.1 kB 00:00
sl-base/primary | 1.0 MB 00:01
sl-base 3702/3702
sl-security | 1.9 kB 00:00
sl-security/primary_db | 200 kB 00:01
234 packages excluded due to repository priority protections
0 packages excluded due to repository protections
Reading version lock configuration
Setting up Install Process
Package ca-policy-egi-core-1.42-1.noarch already installed and latest version
Resolving Dependencies
--> Running transaction check
---> Package emi-bdii-top.x86_64 0:1.0.0-1.sl5 set to be updated
--> Processing Dependency: openldap2.4-servers for package: emi-bdii-top
--> Processing Dependency: bdii-config-top for package: emi-bdii-top
--> Processing Dependency: glite-yaim-bdii for package: emi-bdii-top
--> Processing Dependency: glite-info-update-endpoints for package: emi-bdii-top
--> Processing Dependency: bdii for package: emi-bdii-top
--> Processing Dependency: glue-schema for package: emi-bdii-top
--> Processing Dependency: glite-info-provider-service for package: emi-bdii-top
--> Processing Dependency: glite-yaim-core for package: emi-bdii-top
--> Processing Dependency: glite-info-provider-ldap for package: emi-bdii-top
--> Processing Dependency: glite-info-plugin-fcr for package: emi-bdii-top
--> Running transaction check
---> Package bdii.noarch 0:5.2.5-2.el5 set to be updated
--> Processing Dependency: openldap-servers for package: bdii
--> Processing Dependency: expect for package: bdii
--> Processing Dependency: openldap-clients for package: bdii
---> Package bdii-config-top.noarch 0:1.0.4-1.el5 set to be updated
---> Package glite-info-plugin-fcr.noarch 0:2.0.2-1.sl5 set to be updated
---> Package glite-info-provider-ldap.noarch 0:1.4.1-1.el5 set to be updated
--> Processing Dependency: perl(LWP::Simple) for package: glite-info-provider-ldap
---> Package glite-info-provider-service.noarch 0:1.7.0-1.el5 set to be updated
---> Package glite-info-update-endpoints.noarch 0:2.0.7-1.el5 set to be updated
---> Package glite-yaim-bdii.noarch 0:4.3.4-1.el5 set to be updated
---> Package glite-yaim-core.noarch 0:5.0.2-1.sl5 set to be updated
---> Package glue-schema.noarch 0:2.0.8-1.el5 set to be updated
---> Package openldap2.4-servers.x86_64 0:2.4.22-1.el5 set to be updated
--> Processing Dependency: lib64ldap2.4_2 = 2.4.22-1.el5 for package: openldap2.4-servers
--> Processing Dependency: cyrus-sasl = 2.1.22 for package: openldap2.4-servers
--> Processing Dependency: openldap2.4-extra-schemas >= 1.3-7 for package: openldap2.4-servers
--> Processing Dependency: openldap2.4-extra-schemas >= 1.3-7 for package: openldap2.4-servers
--> Processing Dependency: libltdl.so.3()(64bit) for package: openldap2.4-servers
--> Processing Dependency: libldap_r-2.4.so.2()(64bit) for package: openldap2.4-servers
--> Processing Dependency: liblber-2.4.so.2()(64bit) for package: openldap2.4-servers
--> Processing Dependency: libodbc.so.1()(64bit) for package: openldap2.4-servers
--> Running transaction check
---> Package cyrus-sasl.x86_64 0:2.1.22-5.el5_4.3 set to be updated
---> Package expect.x86_64 0:5.43.0-5.1 set to be updated
---> Package lib64ldap2.4_2.x86_64 0:2.4.22-1.el5 set to be updated
--> Processing Dependency: openldap2.4 >= 2.1.25-4mdk for package: lib64ldap2.4_2
---> Package libtool-ltdl.x86_64 0:1.5.22-7.el5_4 set to be updated
---> Package openldap-clients.x86_64 0:2.3.43-12.el5_6.7 set to be updated
---> Package openldap-servers.x86_64 0:2.3.43-12.el5_6.7 set to be updated
EGI-trustanchors/filelists | 14 kB 00:00
EMI-1-base/filelists_db | 181 kB 00:00
EMI-1-third-party/filelists_db | 57 kB 00:00
EMI-1-updates/filelists_db | 108 kB 00:00
cnaf-local/filelists | 1.1 kB 00:00
epel/filelists_db | 5.5 MB 00:00
lemon-sl5-i386/filelists | 9.5 kB 00:00
sl-base/filelists | 3.3 MB 00:02
sl-security/filelists_db | 870 kB 00:01
---> Package openldap2.4-extra-schemas.noarch 0:1.3-10.el5 set to be updated
---> Package perl-libwww-perl.noarch 0:5.805-1.1.1 set to be updated
--> Processing Dependency: perl-HTML-Parser >= 3.33 for package: perl-libwww-perl
--> Processing Dependency: perl(URI::URL) for package: perl-libwww-perl
--> Processing Dependency: perl(URI) for package: perl-libwww-perl
--> Processing Dependency: perl(HTML::Entities) for package: perl-libwww-perl
--> Processing Dependency: perl(Compress::Zlib) for package: perl-libwww-perl
--> Processing Dependency: perl(URI::Escape) for package: perl-libwww-perl
--> Processing Dependency: perl(URI::Heuristic) for package: perl-libwww-perl
---> Package unixODBC.x86_64 0:2.2.11-7.1 set to be updated
--> Running transaction check
---> Package openldap2.4.x86_64 0:2.4.22-1.el5 set to be updated
---> Package perl-Compress-Zlib.x86_64 0:1.42-1.fc6 set to be updated
---> Package perl-HTML-Parser.x86_64 0:3.55-1.fc6 set to be updated
--> Processing Dependency: perl-HTML-Tagset >= 3.03 for package: perl-HTML-Parser
--> Processing Dependency: perl(HTML::Tagset) for package: perl-HTML-Parser
---> Package perl-URI.noarch 0:1.35-3 set to be updated
--> Running transaction check
---> Package perl-HTML-Tagset.noarch 0:3.10-2.1.1 set to be updated
--> Finished Dependency Resolution
Beginning Kernel Module Plugin
Finished Kernel Module Plugin
Dependencies Resolved
===========================================================================================================================================================================================================================================
Package Arch Version Repository Size
===========================================================================================================================================================================================================================================
Installing:
emi-bdii-top x86_64 1.0.0-1.sl5 EMI-1-base 1.7 k
Installing for dependencies:
bdii noarch 5.2.5-2.el5 EMI-1-updates 20 k
bdii-config-top noarch 1.0.4-1.el5 EMI-1-updates 4.1 k
cyrus-sasl x86_64 2.1.22-5.el5_4.3 sl-base 1.2 M
expect x86_64 5.43.0-5.1 sl-base 160 k
glite-info-plugin-fcr noarch 2.0.2-1.sl5 EMI-1-updates 3.7 k
glite-info-provider-ldap noarch 1.4.1-1.el5 EMI-1-updates 7.1 k
glite-info-provider-service noarch 1.7.0-1.el5 EMI-1-updates 53 k
glite-info-update-endpoints noarch 2.0.7-1.el5 EMI-1-base 5.6 k
glite-yaim-bdii noarch 4.3.4-1.el5 EMI-1-updates 10 k
glite-yaim-core noarch 5.0.2-1.sl5 EMI-1-updates 116 k
glue-schema noarch 2.0.8-1.el5 EMI-1-updates 33 k
lib64ldap2.4_2 x86_64 2.4.22-1.el5 EMI-1-third-party 300 k
libtool-ltdl x86_64 1.5.22-7.el5_4 sl-base 38 k
openldap-clients x86_64 2.3.43-12.el5_6.7 sl-base 223 k
openldap-servers x86_64 2.3.43-12.el5_6.7 sl-base 2.2 M
openldap2.4 x86_64 2.4.22-1.el5 EMI-1-third-party 40 k
openldap2.4-extra-schemas noarch 1.3-10.el5 EMI-1-third-party 46 k
openldap2.4-servers x86_64 2.4.22-1.el5 EMI-1-third-party 2.1 M
perl-Compress-Zlib x86_64 1.42-1.fc6 sl-base 52 k
perl-HTML-Parser x86_64 3.55-1.fc6 sl-base 91 k
perl-HTML-Tagset noarch 3.10-2.1.1 sl-base 14 k
perl-URI noarch 1.35-3 sl-base 116 k
perl-libwww-perl noarch 5.805-1.1.1 sl-base 375 k
unixODBC x86_64 2.2.11-7.1 sl-base 834 k
Transaction Summary
===========================================================================================================================================================================================================================================
Install 25 Package(s)
Upgrade 0 Package(s)
Total download size: 8.0 M
Is this ok [y/N]: y
Downloading Packages:
(1/25): emi-bdii-top-1.0.0-1.sl5.x86_64.rpm | 1.7 kB 00:00
(2/25): glite-info-plugin-fcr-2.0.2-1.sl5.noarch.rpm | 3.7 kB 00:00
(3/25): bdii-config-top-1.0.4-1.el5.noarch.rpm | 4.1 kB 00:00
(4/25): glite-info-update-endpoints-2.0.7-1.el5.noarch.rpm | 5.6 kB 00:00
(5/25): glite-info-provider-ldap-1.4.1-1.el5.noarch.rpm | 7.1 kB 00:00
(6/25): glite-yaim-bdii-4.3.4-1.el5.noarch.rpm | 10 kB 00:00
(7/25): perl-HTML-Tagset-3.10-2.1.1.noarch.rpm | 14 kB 00:00
(8/25): bdii-5.2.5-2.el5.noarch.rpm | 20 kB 00:00
(9/25): glue-schema-2.0.8-1.el5.noarch.rpm | 33 kB 00:00
(10/25): libtool-ltdl-1.5.22-7.el5_4.x86_64.rpm | 38 kB 00:00
(11/25): openldap2.4-2.4.22-1.el5.x86_64.rpm | 40 kB 00:00
(12/25): openldap2.4-extra-schemas-1.3-10.el5.noarch.rpm | 46 kB 00:00
(13/25): perl-Compress-Zlib-1.42-1.fc6.x86_64.rpm | 52 kB 00:00
(14/25): glite-info-provider-service-1.7.0-1.el5.noarch.rpm | 53 kB 00:00
(15/25): perl-HTML-Parser-3.55-1.fc6.x86_64.rpm | 91 kB 00:00
(16/25): perl-URI-1.35-3.noarch.rpm | 116 kB 00:00
(17/25): glite-yaim-core-5.0.2-1.sl5.noarch.rpm | 116 kB 00:00
(18/25): expect-5.43.0-5.1.x86_64.rpm | 160 kB 00:00
(19/25): openldap-clients-2.3.43-12.el5_6.7.x86_64.rpm | 223 kB 00:00
(20/25): lib64ldap2.4_2-2.4.22-1.el5.x86_64.rpm | 300 kB 00:00
(21/25): perl-libwww-perl-5.805-1.1.1.noarch.rpm | 375 kB 00:01
(22/25): unixODBC-2.2.11-7.1.x86_64.rpm | 834 kB 00:00
(23/25): cyrus-sasl-2.1.22-5.el5_4.3.x86_64.rpm | 1.2 MB 00:00
(24/25): openldap2.4-servers-2.4.22-1.el5.x86_64.rpm | 2.1 MB 00:01
(25/25): openldap-servers-2.3.43-12.el5_6.7.x86_64.rpm | 2.2 MB 00:01
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Total 372 kB/s | 8.0 MB 00:22
warning: rpmts_HdrFromFdno: Header V3 DSA signature: NOKEY, key ID df9e12ef
EMI-1-updates/gpgkey | 1.7 kB 00:00
Importing GPG key 0xDF9E12EF "Doina Cristina Aiftimiei (EMI Release Manager) <aiftim@pd.infn.it>" from /etc/pki/rpm-gpg/RPM-GPG-KEY-emi
Is this ok [y/N]: y
Running rpm_check_debug
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
Installing : libtool-ltdl 1/25
Installing : openldap-servers 2/25
Installing : glite-info-update-endpoints 3/25
Installing : glite-info-provider-service 4/25
Installing : glue-schema 5/25
Installing : expect 6/25
Installing : openldap-clients 7/25
Installing : perl-Compress-Zlib 8/25
Installing : cyrus-sasl 9/25
Installing : unixODBC 10/25
Installing : bdii 11/25
Installing : glite-yaim-bdii 12/25
Installing : glite-yaim-core 13/25
Installing : glite-info-plugin-fcr 14/25
Installing : perl-HTML-Tagset 15/25
Installing : perl-HTML-Parser 16/25
Installing : perl-URI 17/25
Installing : perl-libwww-perl 18/25
Installing : glite-info-provider-ldap 19/25
Installing : lib64ldap2.4_2 20/25
Installing : openldap2.4 21/25
Installing : openldap2.4-extra-schemas 22/25
useradd: user ldap exists
Adding user ldap to group ldap
Installing : openldap2.4-servers 23/25
Generating self-signed certificate...
To generate a self-signed certificate, you can use the utility
/usr/share/openldap2.4/gencert.sh...
Installing : bdii-config-top 24/25
Installing : emi-bdii-top 25/25
Installed:
emi-bdii-top.x86_64 0:1.0.0-1.sl5
Dependency Installed:
bdii.noarch 0:5.2.5-2.el5 bdii-config-top.noarch 0:1.0.4-1.el5 cyrus-sasl.x86_64 0:2.1.22-5.el5_4.3 expect.x86_64 0:5.43.0-5.1 glite-info-plugin-fcr.noarch 0:2.0.2-1.sl5
glite-info-provider-ldap.noarch 0:1.4.1-1.el5 glite-info-provider-service.noarch 0:1.7.0-1.el5 glite-info-update-endpoints.noarch 0:2.0.7-1.el5 glite-yaim-bdii.noarch 0:4.3.4-1.el5 glite-yaim-core.noarch 0:5.0.2-1.sl5
glue-schema.noarch 0:2.0.8-1.el5 lib64ldap2.4_2.x86_64 0:2.4.22-1.el5 libtool-ltdl.x86_64 0:1.5.22-7.el5_4 openldap-clients.x86_64 0:2.3.43-12.el5_6.7 openldap-servers.x86_64 0:2.3.43-12.el5_6.7
openldap2.4.x86_64 0:2.4.22-1.el5 openldap2.4-extra-schemas.noarch 0:1.3-10.el5 openldap2.4-servers.x86_64 0:2.4.22-1.el5 perl-Compress-Zlib.x86_64 0:1.42-1.fc6 perl-HTML-Parser.x86_64 0:3.55-1.fc6
perl-HTML-Tagset.noarch 0:3.10-2.1.1 perl-URI.noarch 0:1.35-3 perl-libwww-perl.noarch 0:5.805-1.1.1 unixODBC.x86_64 0:2.2.11-7.1
Complete!
Service configuration
The configuration file for this service is really basic:
# cat site-info.def
################################
# Site configuration variables #
################################
SITE_NAME=INFN-CNAF
SITE_EMAIL="grid-operations@lists.cnaf.infn.it"
SITE_LAT=44.4948
SITE_LONG=11.3417
################################
# BDII configuration variables #
################################
# Hostname of the top level BDII
BDII_HOST=top-bdii01.cnaf.infn.it
YAIM check
# chmod -R 600 /root/siteinfo
# /opt/glite/yaim/bin/yaim -v -s /root/siteinfo/site-info.def -n BDII_top
INFO: Using site configuration file: /root/siteinfo/site-info.def
INFO:
###################################################################
. /'.-. ')
. yA,-"-,( ,m,:/ ) .oo. oo o ooo o. .oo
. / .-Y a a Y-. 8. .8' 8'8. 8 8b d'8
. / ~ ~ / 8' .8oo88. 8 8 8' 8
. (_/ '====' 8 .8' 8. 8 8 Y 8
. Y,-''-,Yy,-.,/ o8o o8o o88o o8o o8o o8o
. I_))_) I_))_)
current working directory: /root/siteinfo
site-info.def date: Nov 25 17:01 /root/siteinfo/site-info.def
yaim command: -v -s /root/siteinfo/site-info.def -n BDII_top
log file: /opt/glite/yaim/bin/../log/yaimlog
Fri Nov 25 17:07:57 CET 2011 : /opt/glite/yaim/bin/yaim
Installed YAIM versions:
glite-yaim-bdii 4.3.4-1
glite-yaim-core 5.0.2-1
####################################################################
INFO: The default location of the grid-env.(c)sh files will be: /usr/libexec
INFO: Sourcing the utilities in /opt/glite/yaim/functions/utils
INFO: Detecting environment
INFO: Executing function: config_info_service_bdii_top_check
INFO: Executing function: config_bdii_5.2_check
INFO: Checking is done.
INFO: All the necessary variables to configure BDII_top are defined in your configuration files.
INFO: Please, bear in mind that YAIM only guarantees the definition of variables
INFO: controlled in the _check functions.
INFO: YAIM terminated succesfully.
Know Issue and Workaround
Missing
/etc/bdii/gip/glite-info-site-defaults.conf
,
GGUS
- Workaround: Check if the file exists and it's contents. If it's missing do (replace INFN-CNAF with your SITE-NAME):
-
mkdir /etc/bdii/gip/
-
echo "SITE_NAME=INFN-CNAF" > /etc/bdii/gip/glite-info-site-defaults.conf
Check also the permission of the directory
/opt/glite/var/cache/gip
if it is not
ldap:ldap
change it:
-
chown -R ldap:ldap /opt/glite/var/cache/gip/
YAIM config
Please use the debug flag (
"-d 6"
) to configure the services in order to have detailed information. For your convenience yo can save all the configuration information in a log file you can look at any time, separated from the
yaimlog
defulat one.
# /opt/glite/yaim/bin/yaim -c -d 6 -s /root/siteinfo/site-info.def -n BDII_top
DEBUG: Checking siteinfo dir is not world readable
DEBUG: Checking site-info.def is syntactically correct
DEBUG: Sourcing /opt/glite/yaim/bin/../defaults/site-info.pre
DEBUG: Sourcing /opt/glite/yaim/bin/../defaults/emi-bdii_top.pre
INFO: Using site configuration file: /root/siteinfo/site-info.def
DEBUG: Sourcing site-info.def file: /root/siteinfo/site-info.def
DEBUG: Sourcing /opt/glite/yaim/bin/../defaults/site-info.post
DEBUG: Sourcing /opt/glite/yaim/bin/../defaults/mapping
INFO:
###################################################################
. /'.-. ')
. yA,-"-,( ,m,:/ ) .oo. oo o ooo o. .oo
. / .-Y a a Y-. 8. .8' 8'8. 8 8b d'8
. / ~ ~ / 8' .8oo88. 8 8 8' 8
. (_/ '====' 8 .8' 8. 8 8 Y 8
. Y,-''-,Yy,-.,/ o8o o8o o88o o8o o8o o8o
. I_))_) I_))_)
current working directory: /root/siteinfo
site-info.def date: Nov 25 17:01 /root/siteinfo/site-info.def
yaim command: -c -d 6 -s /root/siteinfo/site-info.def -n BDII_top
log file: /opt/glite/yaim/bin/../log/yaimlog
Fri Nov 25 17:12:30 CET 2011 : /opt/glite/yaim/bin/yaim
Installed YAIM versions:
glite-yaim-bdii 4.3.4-1
glite-yaim-core 5.0.2-1
####################################################################
INFO: The default location of the grid-env.(c)sh files will be: /usr/libexec
INFO: Sourcing the utilities in /opt/glite/yaim/functions/utils
INFO: Detecting environment
DEBUG: Detect platform: OS flavour detected is: emi
DEBUG: Detected architecture is 64BIT
DEBUG: Detect platform: OS type detected: sl5
DEBUG: Resulted NODE_TYPE_LIST is : BDII_top
DEBUG: Setting environment variable GRID_ENV_LOCATION, to value "/usr/libexec".
DEBUG: Unset environment variable GRID_ENV_LOCATION.
DEBUG: Setting environment variable LCG_LOCATION, to value "/usr".
DEBUG: Unset environment variable LCG_LOCATION.
DEBUG: Setting environment variable GLITE_LOCATION, to value "/usr".
DEBUG: Unset environment variable GLITE_LOCATION.
DEBUG: Setting environment variable GLITE_LOCATION_VAR, to value "/var".
DEBUG: Unset environment variable GLITE_LOCATION_VAR.
DEBUG: Appending value "/bin" to environment variable PATH.
DEBUG: Deleting value "/bin" from environment variable PATH.
DEBUG: Appending value "/opt/glite/share/man" to environment variable MANPATH.
DEBUG: Deleting value "/opt/glite/share/man" from environment variable MANPATH.
DEBUG: Sourcing node definition file: /opt/glite/yaim/bin/../node-info.d/glite-bdii_top
INFO: Executing function: config_info_service_bdii_top_check
INFO: Executing function: config_bdii_5.2_check
INFO: Executing function: config_info_service_bdii_top_setenv
DEBUG: This function currently doesn't set any environment variables.
INFO: Executing function: config_info_service_bdii_top
DEBUG: Skipping function: config_bdii_5.2_setenv because it is not defined
INFO: Executing function: config_bdii_5.2
mount: mount point /var/run/bdii/db does not exist
Stopping BDII: BDII already stopped
Starting BDII slapd: [ OK ]
Starting BDII update process: [ OK ]
INFO: Configuration Complete. [ OK ]
INFO: YAIM terminated succesfully.
Service checks
The service could takes ~10 minutes to publish all the informations.
From a User Interfaces, try the following commands (replace top-bdii01.cnaf.infn.it with your top-bdii hostname):
-
telnet top-bdii01.cnaf.infn.it 2170
. The port 2170 must be opened.
-
lcg-infosites --is top-bdii01.cnaf.infn.it --vo ops ce| wc -l
should return a number at least grater than 500
- check freshness: the information published must be updated. Downolad check_bdii_entries and execute it like in the example:
./check_bdii_entries -H top-bdii01.cnaf.infn.it -t 60 -b Mds-Vo-Name=local,O=Grid -p 2170 -w 1200:1 -c 3600:1 -f stats
OK: freshness=276s, entries=1 |freshness=276s;entries=1
Revision
Last revision: 2011-11-28 - Paolo Veronesi
--
PaoloVeronesi - 2011-11-25